一种面向公共服务的跨域授权模型的研究及实现

文章提出一种基于策略的RBAC的跨域统一授权模型,在基于策略的RBAC单域授权模型的研究基础上,扩展单域模型为多域模型,通过授权控制中心之间建立跨域级联机制,构成广域授权网络,实现面向多应用系统、大型公共服务域的跨域统一自动授权机制.     

炮兵营射击的弹着点模拟及射击误差分析

弹着点模拟是对敌火力打击目标毁伤仿真的重要环节。在分析炮兵营射击误差构成与计算方法的基础上,研究建立了炮兵射击的弹着点散布蒙特卡洛(Monte-Carlo)仿真模型,实现了对集火射向、适宽射向、三距离射击等多种火力打击方式共同作用下的弹着点散布模拟,为目标毁伤仿真研究提供了模型支持。以此为基础,通过分析各组误差对毁伤概率的影响,发现对于炮兵营打击面散布目标来说,营共同误差是影响毁伤概率的最显著因素,应当通过提高测定目标位置和气象准备的精度减小误差以提高对目标的毁伤效果。     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

GPS接收信号中线性扫频干扰的抑制

研究了阵列接收的GPS接收信号中线性扫频(LFM)干扰的抑制问题。LFM信号瞬时频率的估计是抑制干扰的关键,而要准确估计信号瞬时频率,必须抑制接收信号时频分布中交叉项干扰。本文对接收信号矢量进行白化,得到信号矢量白化后的空时频分布(STFD)矩阵。文中推出一个与传统方法获得的判决变量不同的判决变量,用该判决变量可以更加清晰地选出LFM信号在时频分布中的自项。根据时频脊点的分布估计LFM信号频率参数以及信号瞬时频率,之后即可根据瞬时频率构建陷波器滤除干扰。仿真表明该方法能够将受交叉项严重干扰的接收信号时频分布映射为清晰的接收信号自项的时频分布,在数据快拍数满足一定要求时可以很好地抑制掉LFM干扰。     

信息化条件下战斗精神培育需要关注的几个问题

信息化条件下的未来战争 ,必须注重官兵个体战斗精神的培育 ;必须大力培育科学精神 ,用科学的态度 ,分析作战的特点和规律 ,讲科学讲智谋 ;必须充分发挥人脑的作用 ,提高自身的作战能力 ,超常发挥智能潜能。     

地铁火灾灭火战斗原则探讨

从地铁火灾特点及地铁灭火救援战斗规律入手，探讨了消防部队参加地铁火灾救援的战斗原则及这些原则的运用，供消防部队进行地铁火灾灭火救援时参考。     

Branch‐and‐price‐and‐cut for the manpower routing problem with synchronization constraints

In this article, we propose a branch‐and‐price‐and‐cut (BPC) algorithm to exactly solve the manpower routing problem with synchronization constraints (MRPSC). Compared with the classical vehicle routing problems (VRPs), the defining characteristic of the MRPSC is that multiple workers are required to work together and start at the same time to carry out a job, that is, the routes of the scheduling subjects are dependent. The incorporation of the synchronization constraints increases the difficulty of the MRPSC significantly and makes the existing VRP exact algorithm inapplicable. Although there are many types of valid inequalities for the VRP or its variants, so far we can only adapt the infeasible path elimination inequality and the weak clique inequality to handle the synchronization constraints in our BPC algorithm. The experimental results at the root node of the branch‐and‐bound tree show that the employed inequalities can effectively improve the lower bound of the problem. Compared with ILOG CPLEX, our BPC algorithm managed to find optimal solutions for more test instances within 1 hour. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 138–171, 2016     

自适应管道有源消声系统的研究

有源消声技术对于管道中低频噪声的控制非常有效。本文描述的自适应管道有源消声系统,性能稳定,对单频的消声量可达30dB,对宽带随机噪声的消声量不低于14dB。